WEC 2016
- Drawprintcutglue
- Papier Calque
- Messages : 92
- Enregistré le : lun. août 03, 2015 12:41 am
- Localisation : Netherlands
- A remercié : 1 fois
- A été remercié : 67 fois
WEC 2016
J'ai commencé sur les voitures: /I started on the cars:
Modèle est toujours en cours de forme /Model is still being shaped
Je travaille sur les textures / I'm working on the textures
Modèle est toujours en cours de forme /Model is still being shaped
Je travaille sur les textures / I'm working on the textures
- Ces utilisateurs ont remercié l’auteur Drawprintcutglue pour son message (2 au total) :
- raikonen • Rodrigoalmeida2711
-
- Papier Photo
- Messages : 2855
- Enregistré le : sam. oct. 27, 2007 8:05 am
- A remercié : 33 fois
- A été remercié : 922 fois
- Contact :
Re: WEC 2016
Ooooooooooooh yes!
This is good! This is heaven!
Keep on going
Don't stop me now
I am having a good time
Time waits for nobody
Time waits for no.one
We've got to build this world together
Or we will have no future at all
Because time _ it waits for nobody
Keep on going
This is good! This is heaven!
Keep on going
Don't stop me now
I am having a good time
Time waits for nobody
Time waits for no.one
We've got to build this world together
Or we will have no future at all
Because time _ it waits for nobody
Keep on going
http://teamaocmodels.tripod.com (vérifié 20180717)
http://teamaoc.webs.com (vérifié 20180717)
http://teamaocpaperho.tripod.com (vérifié 20180717)
http://teamaocpaperf12007.tripod.com (vérifié 20180717)
http://teamaoc.webs.com (vérifié 20180717)
http://teamaocpaperho.tripod.com (vérifié 20180717)
http://teamaocpaperf12007.tripod.com (vérifié 20180717)
-
- Papier Photo
- Messages : 2855
- Enregistré le : sam. oct. 27, 2007 8:05 am
- A remercié : 33 fois
- A été remercié : 922 fois
- Contact :
Re: WEC 2016
alors?
http://teamaocmodels.tripod.com (vérifié 20180717)
http://teamaoc.webs.com (vérifié 20180717)
http://teamaocpaperho.tripod.com (vérifié 20180717)
http://teamaocpaperf12007.tripod.com (vérifié 20180717)
http://teamaoc.webs.com (vérifié 20180717)
http://teamaocpaperho.tripod.com (vérifié 20180717)
http://teamaocpaperf12007.tripod.com (vérifié 20180717)
-
- Donateurs
- Messages : 847
- Enregistré le : sam. nov. 01, 2008 6:46 pm
- Localisation : toulon
- A remercié : 410 fois
- A été remercié : 247 fois
Re: WEC 2016
les futurs fichiers pourront ils etre au 1-43 entre autres ? merci d'avance !!!
sauvez les forêts canadiennes... bouffez du castor !!!
- Drawprintcutglue
- Papier Calque
- Messages : 92
- Enregistré le : lun. août 03, 2015 12:41 am
- Localisation : Netherlands
- A remercié : 1 fois
- A été remercié : 67 fois
Re: WEC 2016
Je pensais que je fais un dans les 24 h, mais comme toyota ... aucune victoire.
J'espère que je termine bientôt.
I though i make one within 24h, but like toyota...no win.
I hope i finish it soon.
J'espère que je termine bientôt.
I though i make one within 24h, but like toyota...no win.
I hope i finish it soon.
- Drawprintcutglue
- Papier Calque
- Messages : 92
- Enregistré le : lun. août 03, 2015 12:41 am
- Localisation : Netherlands
- A remercié : 1 fois
- A été remercié : 67 fois
Re: WEC 2016
Si quelqu'un peut tester le construire et signaler les problèmes. Merci d'avance.
La peinture est pas fini. 1 côté est juste en miroir, parce que cela pour tester seulement.
[edit] deleted pdf [/edit]
If anyone can test build it and report issues. Thank you in advance.
The painting is not finished. 1 side is just mirrored, because this for testing only.
La peinture est pas fini. 1 côté est juste en miroir, parce que cela pour tester seulement.
[edit] deleted pdf [/edit]
If anyone can test build it and report issues. Thank you in advance.
The painting is not finished. 1 side is just mirrored, because this for testing only.
Modifié en dernier par Drawprintcutglue le lun. juin 27, 2016 4:26 pm, modifié 1 fois.
- Drawprintcutglue
- Papier Calque
- Messages : 92
- Enregistré le : lun. août 03, 2015 12:41 am
- Localisation : Netherlands
- A remercié : 1 fois
- A été remercié : 67 fois
Re: WEC 2016
My test build, roof support not easy enough and the rear is too small detailed. I'll change the rear for sure. Perhaps with a slightly improved layout. It is easier to build.
- Ces utilisateurs ont remercié l’auteur Drawprintcutglue pour son message :
- Michel cerfvoliste
- Drawprintcutglue
- Papier Calque
- Messages : 92
- Enregistré le : lun. août 03, 2015 12:41 am
- Localisation : Netherlands
- A remercié : 1 fois
- A été remercié : 67 fois
Re: WEC 2016
Petit aperçu et un tir de détail de l'aileron arrière /
Small preview and a detailed shot of the rearwing S'amuser! / Have fun! bientôt #67, #68, #79
@derrick 1/43 follow later / 1/43 suivre plus tard
Small preview and a detailed shot of the rearwing S'amuser! / Have fun! bientôt #67, #68, #79
@derrick 1/43 follow later / 1/43 suivre plus tard
- Ces utilisateurs ont remercié l’auteur Drawprintcutglue pour son message :
- Michel cerfvoliste
- Drawprintcutglue
- Papier Calque
- Messages : 92
- Enregistré le : lun. août 03, 2015 12:41 am
- Localisation : Netherlands
- A remercié : 1 fois
- A été remercié : 67 fois
- Drawprintcutglue
- Papier Calque
- Messages : 92
- Enregistré le : lun. août 03, 2015 12:41 am
- Localisation : Netherlands
- A remercié : 1 fois
- A été remercié : 67 fois
- Drawprintcutglue
- Papier Calque
- Messages : 92
- Enregistré le : lun. août 03, 2015 12:41 am
- Localisation : Netherlands
- A remercié : 1 fois
- A été remercié : 67 fois
Re: WEC 2016
toujours voulu essayer / always wanted to try
Ford GT Le Mans 2016 after 12 hours @3am
[edit]Added 1:;43[/edit]
- Ces utilisateurs ont remercié l’auteur Drawprintcutglue pour son message :
- LEMAN_Jean-Pierre
- Drawprintcutglue
- Papier Calque
- Messages : 92
- Enregistré le : lun. août 03, 2015 12:41 am
- Localisation : Netherlands
- A remercié : 1 fois
- A été remercié : 67 fois
Re: WEC 2016
Ford GT 1:43
- Fichiers joints
-
- ford-64-pdo.zip
- locked pdo
- (2.07 Mio) Téléchargé 132 fois
Modifié en dernier par Drawprintcutglue le jeu. avr. 12, 2018 12:57 am, modifié 1 fois.
- Ces utilisateurs ont remercié l’auteur Drawprintcutglue pour son message (3 au total) :
- Michel cerfvoliste • Dephasus • LEMAN_Jean-Pierre