Page 1 sur 1

Reaver Titan Build

Posté : dim. févr. 10, 2013 8:30 am
par ARMORMAN
Hello, I have already posted this in several other forums, but I neglected this one. Sorry.

Two years to the month after starting this project, I am calling it done. I am probably going to change out the missiles, but aside from that, it is complete. 23" tall x 15" x 15". I learned a lot.

The purpose for this project was to test out whether a paper model this big could be made completely out of paper, stand under it's own weight and look reeeeeeeeeallly cool doing it. I believe the answer is yes on all three counts, but were I to do it again, I would probably redesign how the toes are joined to the foot, reinforce the knee and redesign the hip assembly.

Although the time spent two years, part of that time was figuring out how to accomplish what I wanted to do. Specifically the thigh and hip assembly which went through several design/build/redesign iterations to get the final result. A happy unintended result is that it looks like it is stalking rather than static.


Bonjour, J'ai déjà posté ceci dans plusieurs autres forums, mais j'ai oublié celui-ci. Désolé.

Deux ans au mois après le début de ce projet, je fais appel fait. Je vais probablement changer les missiles, mais à part cela, il est complet. 23 "haut x 15" x 15 ". J'ai beaucoup appris.

Le but de ce projet était de tester si un modèle en papier de cette taille pourrait être faite complètement de papier, tenir sous son propre poids et regarder reeeeeeeeeallly frais le faire. Je crois que la réponse est oui à ces trois points, mais si je devais le refaire, je serais probablement repenser la façon dont les orteils sont joints au pied, le genou de renforcer et restructurer l'ensemble de la hanche.

Bien que le temps a passé deux ans, une partie de ce temps a été de trouver comment accomplir ce que je voulais faire. Plus précisément, la cuisse et la hanche assemblage qui est passé à travers la conception de plusieurs / build / redessiner itérations pour obtenir le résultat final. Un résultat heureux involontaire, c'est qu'il ressemble, il est traque plutôt que statique.


Image

Image

Image

Image

Image

Image

Image

Re: Reaver Titan Build

Posté : dim. févr. 10, 2013 9:48 am
par Michel cerfvoliste
Il est impressionnant et plein de détails !

Les finitions sont en peinture après montage ou imprimées avant montage ?

Y a t'il des parties articulées ?

Bon dimanche, Michel

Re: Reaver Titan Build

Posté : dim. févr. 10, 2013 4:42 pm
par ARMORMAN
The model is not articulated (though I did incorporate magnets into the head and weapons mounts so I could change them out).

All parts were cut and glued down before painting.

I should also note that there are no decals on the model, everything is hand cut paper including every rivet.



Le modèle n'est pas articulé (bien que je n'ai incorporer des aimants dans la tête et les supports d'armes pour que je puisse les changer).

Toutes les pièces ont été coupés et collés au sol avant de peindre.

Il faut aussi noter qu'il n'existe pas de vignettes sur le modèle, tout est coupé à la main du papier, y compris tous les rivets.