Michelin Ranking Tower, circuit de la Sarthe

Projets en cours des concepteurs
Répondre
Avatar du membre
Drawprintcutglue
Papier Calque
Messages : 92
Enregistré le : lun. août 03, 2015 12:41 am
Localisation : Netherlands
A remercié : 1 fois
A été remercié : 67 fois

Michelin Ranking Tower, circuit de la Sarthe

Message par Drawprintcutglue »

J'ai finalement trouvé la hauteur de l'objet, qui correspondait à mon travail de prévisualisation.
La tour de classement / classement Michelin est construite en 2013 sur le circuit de la Sarthe.
A l'origine, il fait environ 17 mètres de hauteur. Pour l'instant je l'ai redimensionné à 1:64 (265mm) donc ça colle bien sur a4, sans être coupé en petits morceaux.

Je n'ai pas testé si c'est le cas, mais j'ai ajouté des pièces blanches pour le rendre possible.

---

I finally found the height of the object, which matched my previews work.
Michelin scoring/ranking tower is build in 2013 at Circuit de la Sarthe.
Originally it's about 17 meters in height. For now i've scaled it to 1:64 (265mm) so it still fits nicely on a4, without being cut into little pieces.

I haven't tested if it stays up right, but i've added white pieces to make it possible. It may need more support.

v1
v1
michelin-ranking-tower-v1.pdf
Michelin Ranking Tower
(1.59 Mio) Téléchargé 566 fois
Ces utilisateurs ont remercié l’auteur Drawprintcutglue pour son message (2 au total) :
Michel cerfvolistederrick83
Avatar du membre
Drawprintcutglue
Papier Calque
Messages : 92
Enregistré le : lun. août 03, 2015 12:41 am
Localisation : Netherlands
A remercié : 1 fois
A été remercié : 67 fois

Re: Michelin Ranking Tower, circuit de la Sarthe

Message par Drawprintcutglue »

It does stand on rough surfaces, but not on slippery surfaces. I've added a small pieces of cardboard to it.
IMG_20180709_112612~01~01.jpg
I've also created a part of the pitwall, I want to create more items to it for a diorama.
IMG_20180709_095442~01.jpg
Downloads will follow soon

Il repose sur des surfaces rugueuses, mais pas sur des surfaces glissantes. J'ai ajouté un petit morceau de carton dessus.
IMG_20180709_112612~01~01.jpg
J'ai également créé une partie du pitwall, je veux créer plus d'éléments pour un diorama.
IMG_20180709_095442~01.jpg
Les téléchargements suivront bientôt
Ces utilisateurs ont remercié l’auteur Drawprintcutglue pour son message :
Michel cerfvoliste
Répondre

Retourner vers « Projets et développements en cours »